Axel AX3000 80 Скачать руководство пользователя страница 174

Страница: 174 / 224

Installing under UNIX/LINUX

164

AX3000 Models 80 and 85 - User's Manual

Each auxiliary port using the tty protocol (see Chapter 3.5.4) is identified by the name of the
AX3000 (from the

/etc/hosts

file) and a special keyword. For example:

axel1

aux1

/dev/ptyp12

/dev/ttyp12

axel1

aux2

/dev/ptyp13

/dev/ttyp13

axel2

parallel /dev/ptyp2

/dev/ttyp2

An auxiliary port controlled by the tty server is seen as a Unix/Linux local port (like a multi I/O
board).

Data can be sent to an auxiliary port by:

- Either a redirection to the ttyp (example: "cat file > /dev/ttyp12")
- Or declaring a local printer attached to the ttyp (/dev/ttyp12). This printer is used through the

lp command.

8.3.2 - The LPD Protocol

Set the auxiliary port as shown in Chapter 3.5.2.

Use the appropriate UNIX system management tool to add a remote printer. At least, two
parameters are requested:

- The name of the remote host: enter the AX3000's hostname (refer to

/etc/hosts

- The name of the printer: this is the

Printer Port Name

entered when the AX3000 was set up.

Run the

command to use this printer.

Note

: some options of the

command (number of copies, banner, etc) cannot be used, because

the AX3000 is not a UNIX server and has no hard disk on which to run a spooler.

8.3.3 - The rsh Command

The rsh command (or rcmd on SCO OpenServer) can be used to print a file.

The rsh parameters are:

- The hostname or the IP address of the device,
- A keyword which is the AX3000 auxiliary port name. This name has been set through the

AX3000 Set-Up (see Chapter 3.5.6).

To print a file, the rsh command reads data from 'standard input' (

stdin

) and sends this data to

one of the AX3000’s auxiliary ports. For example:

$ rsh axname parallel < file <CR>

In this example,

axname

is the name of the AX3000 (refer to

/etc/hosts

file) and

parallel

the Printer Port Name of the AX3000 auxiliary port.

8.3.4 - Using Transparent Mode

One of the auxiliary or logical ports should be selected as the default printer port which will be
controlled by escape sequences.

Select the

[Configuration]-[Terminal]-[Miscellaneous]

dialog and set the 'default printer port'.

This default port can only be used if no network service (lpd, tty, etc) is currently using it.

Содержание AX3000 80

































































































































































































































Результаты поиска

Содержание AX3000 80

Отзывы:

Бренды по названию

Популярные бренды

Axel AX3000 80, Руководство пользователя

Результаты поиска

Содержание AX3000 80

Отзывы:

Бренды по названию

Популярные бренды