Axas E4HD, Руководство пользователя, Страница: 30 / 69

29
User Manual
DVB C/T2 HYBRID RECEIVER
⑧ Network Scan
Here you have two options for
YES
and
NO. NO
is used to scan the transponder (TP) based
on the data that your receiver currently has.
YES
is used to scan the TP not just based on the
existing TP data but also using new TP data, if there is TP data newly transported from the TP.
Naturally,
YES
option takes longer while it may results in a better scan result.
⑨ Clear Before Scan
YES
is used when you want to delete the existing channel list before you start the automatic
scan. If you want to keep the existing list, select
NO
.
⑩ Only Free Scan
Here you have two options for
YES
and
NO .
You want to scan only Free to Air channels without
any encryption, select
YES.
Otherwise, select
NO
to scan all FTA and CAS channels.
Press
OK
to activate the manual scan. This will take some minutes. As the scan proceeds, you will
see the progressive bar and the newly found services underneath.
2. Factory Reset
[ : MENU > Setup > Factory Reset]
If you want to erase all installed service list as well as configurations, run the
Factory Reset
process.
Select
YES
in the below menu to run the factory reset.
Upon the completion of factory reset process, your receiver will reboot automatically and start the
First Time Installation
process.
NOTE:
If you do this factory reset, all of your configuration data including bouquets, service lists,
satellite parameters and so on will be erased.