EG
MONITOR PANEL
1. TIMER lamp:
This lamp lights up when the system is
being controlled by the timer or sleep mode.
2. OPERATION lamp:
This lamp lights up during operation.
It blinks once to announce that the remote control signal
has been received and stored. It blinks continuously
during the protection modes (defrosting, etc.).
This lamp flashes and the air conditioner simultaneously
stops during exceeding condensate drainage or because
of malfunctioning of the condensate drainage system.
The OFF position does not disconnect the power. Use
the main power switch to turn off power completely.
WARNING
WATER-LEVEL ALARM
3
3. STANDBY lamp:
This lamp lights up when the air
conditioner is connected to the power and ready to receive
the remote control command.
4. Receiver :
receives signals transmitted from the remote
control.
5. Operation button (without remote control):
Push the
button to walk through the OFF, COOL and HEAT
operation modes.
PRODUCT IDENTIFICATION
10
2
7
11
5
6
1
8
3
4
0
1.
Infrared rays remote control unit
0
2.
Monitor panel
0
3.
Supply air deflector
,
4.
Return air grille
,
5.
Outdoor unit
0
6.
Flexible tube
0
7.
Air filter
0
8.
Electric cable with plug
0
9.
Service tube for condensate evacuation
10.
Outdoor unit basket or support
11.
Quick coupling cover
9
1
5
2
4
3
1
5
2
4
3
3742560110-U-I-AXAIR-2005.qxd 10-02-2005 11:49 Pagina 14
