1010 Professional Transducer Display
Quick Start
Page 8
Advanced Witness Systems Ltd
1010 Professional Transducer Display Operating Manual
QUICK START GUIDE
The AWS PTD has 4 soft key buttons and 1 pushbutton/ switch.
The soft key button effects are dependant on what the screen
shows. A summary of the effects can be found on page 10.
Attach PTD to an AWS Intelligent Transducer via an
AWS ITC-
1009
transducer cable (not supplied). Alternatively attach the PTD
to an analogue transducer via an
AWS IITC-1008
intelligent inline
transducer cable.
1010M
Switch the switch on the upper 1010M
case to the “
On
” position
to turn the unit on. To turn off the 1010M switch the switch on the
upper casing to the “
Off
” position. After switch on the screen will
show the range of the transducer attached to the PTD. If no
transducer is connected then it will show “
Not Found
”.
1010B/H
Press and hold the
push button on the upper 1010B/H case
to
turn the unit on. The 1010B/H can be turned off by pressing and
holding the far left soft key. The 1010B/H also has an inbuilt timer
to switch battery power off 60 minutes after the last button was
pushed. After switch on the screen will show the current battery
level followed by the range of the transducer attached to the PTD.
If no transducer is connected then it will show “
Not Found
”.
BATTERY LEVEL PREVIOUS SET-UP PROMPT
For both versions the user is then prompted to select either the
previous set-up “
Yes
” or “
No
”.
