Ref: 1.8 User Guide LED Bulbs Bluetooth Mesh
AwoX
Confidential Document – Do not copy
Page: 8 of 60
2.2.2
C
OLOR SETTING
Use the color pad to adjust the color of your bulb.
To go on a basic color (red, blue, green, yellow), just
long press the basic color button during 2 seconds.
To go on an intermediate color between two basic
colors (for example orange), you have to start with a
basic color (red) and then press the yellow button
repeatedly until you reach the desired orange color.
2.2.3
T
EMPERATURE OF WHITE SETTING
Press the top button to go to the warm white (2700K minimum)
Press down button to go to cold white (6500K maximum)
2.2.4
V
ISUAL EFFECTS SETTING
Press the top button to start the candle mode. The candle mode changes the intensity
on the selected color to give a motion effect simulating a candle.
Press the down button to start color mode. The color effect is to cycle the 16 major
colors.
Pressing any other button stops the current effect.
2.2.5
F
AVORITES SETTING
The buttons allow you to put the bulb (s) on your favorite color and intensity at the
touch of a button.
To save a favorite, first set the light bulbs to the desired color and intensity and long
press the FAVORI1 or FAVORI2 buttons.
To recall a favorite, make a short press.
