Ref: 1.8 User Guide LED Bulbs Bluetooth Mesh
AwoX
Confidential Document – Do not copy
Page: 6 of 60
2
Pack bulbs(s) + remote control
You have just purchased a pack consisting of one or two light bulbs and a remote control:
2.1
C
ONTROL YOUR BULB WITH YOUR REMOTE CONTROL
1.
Insert the batteries into the remote
control.
2.
Plug in the bulb and turn it on. It
lights red when it comes out of its
packaging.
3.
Press and hold the ON button on the
remote control for more than 3
seconds.
4.
If the light bulb is blinking, the
remote control is connected. You
can control your light bulb with it.
5.
If the bulb does not blink, the
association has failed. In this case,
turn off the bulb for a few seconds
and then turn it back on and repeat
the procedure from step 3).
