11/13
Dirt Trap - Type: DN25 - DN100 / PN10
Operating Instructions
The „Intended Use“ also calls for meeting the conditions and requirements specified by the manufacturer
for operation, maintenance and repair.
The work described in this instruction manual is detailed such that only a specialist can understand and
carry out such work.
Expert
A person who, given his/her technical and functional knowledge, and experience, can judge assigned
work and realise potential risks and hazards that may exist.
8
AWH dirt traps have been specifically designed and manufactured for installation in piping systems with
the aim of fitration liquid flow in trade and industrial applications (food industry, chemical industry,
pharmaceutical industry and minimum-germ processes).
Fluids intended to be handled include water, steam, mineral oil, foodstuffs, liquids used in chemical and
the pharmaceutical industries, which are subject to a hygiene standard.
2.2 Intended Use
WARNING
This dirt trap is exclusively intended for the purpose detailed above. Any use
other than that outlined above or any modification made to the dirt trap without
manufacturer‘s prior written authorization shall be considered „not intended“,
and the manufacturer shall not accept liability for any damage that may result
from such use or modification not intended. The risk involved shall be solely borne
by the operating company. The dirt trap must not be commissioned until it has
been ensured that all safety devices are functioning and that the installation into
which this strainer has been integrated is in conformity with the EU Guidelines.