AWG I Operating manual I Fittings I
Foam nozzles M2, M4, M8
DELIVERY, TRANSPORT, STORAGE
M1107B10 I Rev. 02-03/20
ENGLISH
29 / 40
ID No.
Type
Connection
Dimensions [mm]
Weight
L
W
H
[kg]
603 517 99 M4 BSP
G2"
(male)
632 265 302 4.7
603 732 99 M8 Storz
75
(B) 765 304 350 7.5
604 003 99 M8 BSP
G2"
(male)
790 300 370 6.1
This table lists the common Storz adapters.
Versions without adapters are marked "Anschluss BSP" (British Standard Pipe thread) .
These devices are equipped with a pipe thread in accordance with ISO 228 that can be
used to mount further adapter systems.
For versions not listed in the table, the values for the BSP connection apply; the respec-
tive adapter system is not taken into account.
4
DELIVERY, TRANSPORT, STORAGE
4.1 Delivery
The Foam nozzle has been carefully packaged at AWG Fittings GmbH.
After unpacking, check the delivery for damage and verify com-
pleteness.
Any damage must be immediately reported to the carrier.
If parts are missing, immediately inform the responsible specialist
dealer or AWG Fittings GmbH.
The foam nozzle is delivered ready to be connected and is immediately
ready for use after connecting to a hose with a suitable adapter. No
special commissioning is required before first use.
4.2
Transport in a vehicle, storage
The foam nozzle has run dry.
The foam nozzle can be transported and stored in any position.
Especially during transport inside a vehicle, the foam nozzle must not
fall over. If necessary, secure the foam nozzle using a belt. During
transport, the foam nozzle must not be damaged by other heavy
equipment.
To ensure proper functioning, the foam nozzle may only be stored in a
clean condition.
