AWG I Operating manual I Fittings I
Inductors Z2, Z4 and Z8
DELIVERY, TRANSPORT, STORAGE
30 / 40
ENGLISH
M1061B10 I Rev. 01-02/20
4
DELIVERY, TRANSPORT, STORAGE
4.1 Delivery
The Inductor has been carefully packaged at AWG Fittings GmbH.
After unpacking, check the delivery for damage and verify com-
pleteness.
Any damage must be immediately reported to the carrier.
If parts are missing, immediately inform the responsible specialist
dealer or AWG Fittings GmbH.
The inductor is delivered ready to be connected and is immediately
ready for use in an extinguishing system after connecting with a
suitable adapter. No special commissioning is required before first use.
4.2
Transport in a vehicle, storage
The inductor has run dry.
The inductor can be transported and stored in any position.
Especially during transport inside a vehicle, the inductor must not fall
over. If necessary, secure the inductor using a belt. During transport,
the inductor must not be damaged by other heavy equipment.
To ensure proper functioning, the inductor may only be stored in a
clean condition.
5
USE
5.1 Notes
CAUTION
Attach adapters correctly
Danger of injury due to loosening of adapter connections.
– Always insert the adapters up to the stop and couple them fully.
