AWB RG300 Скачать руководство пользователя страница 128

Страница: 128 / 215

ØßÐÌÛÎ

| Introduction

RG300 Hardware Description

óÚ

ÌßÌËÍ

ÔÛÜ

The RG300 includes a Wi-Fi LED indicator that displays the Wi-Fi network

status. The LED, which is located on the front panel, is described in the

following table.

ÓßÈ Í

×ÙÒßÔ

ÔÛÜ

The RG300 includes seven WiMAX signal strength LED indicators that

display the current WiMAX receive signal status. The LEDs, which are

located on the front panel, are described in the following table.

ÔßÒ Ð

ÑÎÌÍ

The RG300 provides up to four 10BASE-T/100BASE-TX RJ-45 ports. The

LAN ports are standard RJ-45 Ethernet network ports that connect directly

to a PC. They can also be connected to an Ethernet switch or hub to

support more users.

The RJ-45 ports support automatic MDI/MDI-X operation, so you can use

straight-through cables for all network connections to PCs or servers, or to

other switches or hubs. The port supports auto-negotiation, so the

optimum transmission mode (half or full duplex), and data rate (10 or

100 Mbps) is selected automatically.

Table 2: Wi-Fi Status LED

Status

Description

On Green

The Wi-Fi radio is enabled and operating normally.

Flashing Green

Indicates data traffic in the Wi-Fi network.

Off

There is no Wi-Fi connection or the radio is disabled.

Table 3: WiMAX Signal Status LEDs

LED

Status

Description

On Blue

Indicates the receive signal is 5 dB or more.

On Blue

Indicates the receive signal is 8 dB or more.

On Blue

Indicates the receive signal is 12 dB or more.

On Blue

Indicates the receive signal is 15 dB or more.

On Blue

Indicates the receive signal is 18 dB or more.

On Blue

Indicates the receive signal is 20 dB or more.

On Blue

Indicates the receive signal is 25 dB or more.

1-7 in sequence On Blue

The unit is scanning frequency channels.

All 7 LEDs

Off

No power is being supplied to the unit.

Содержание RG300
























































































































































































































Результаты поиска

Содержание RG300

Отзывы:

AWB RG300, Руководство пользователя, Страница: 128 / 215

Результаты поиска

Содержание RG300

Отзывы: