Award PPS1201 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 10

Award PPS1201 Скачать руководство пользователя страница 9

EN

9

9

MAINTENANCE

REMOTE CONTROL (OPTIONAL)

The appliance can be controlled using a remote control powered
by  a  1.5  V  carbon-zinc  alkaline  batteries  of  the  standard  LR03-
AAA type (not included).
•  Do not place the remote control near to heat sources.
•  Used batteries must be disposed of in the proper manner.

Metal grease filters

These can be washed in the dishwasher, and need to be cleaned
whenever the

S1

Led comes on or at least once every 2 months

use, or more frequently if use is particularly intensive.

CLEANING THE FILTERS

Resetting the alarm signal

• Turn the Lights and the Suction Motor off.
• Press

T3

and hold for at least 3 seconds, until LED flashes

three times in confirmation.

Cleaning the Filters

• Remove the Filter, pushing it towards the back of the unit and

at the same time pulling downward.

• Wash the filter without bending it, and leave it to dry thor-

oughly before replacing (if the surface of the filter changes
colour over time, this will have absolutely no effect on its effi-
ciency).

• Replace, taking care to ensure that the handle faces forwards.

«
...
7
8
9
10
»

Содержание PPS1201











Отзывы:

Нет отзывов