EN - 8
1.2 Installation warnings
Before using your fridge freezer for the first
time, please pay attention to the following
points:
•
The operating voltage for your fridge
freezer is 220-240 V at 50Hz.
•
The plug must be accessible after
installation.
•
Your fridge freezer may have an odour
when it is operated for the first time. This
is normal and the odour will fade when
your fridge freezer starts to cool.
•
Before connecting your fridge freezer,
ensure that the information on the data
plate (voltage and connected load)
matches that of the mains electricity
supply. If in doubt, consult a qualified
electrician.
• Insert the plug into a socket with an
efficient ground connection. If the socket
has no ground contact or the plug does
not match, we recommend you consult a
qualified electrician for assistance.
•
The fridge - freezer must be connected
with a properly installed fused socket.
The power supply (AC) and voltage at
the operating point must match with
the details on the name plate of the
fridge - freezer (the name plate is located
on the inside left of the fridge - freezer).
•
We do not accept responsibility for any
damages that occur due to ungrounded
usage.
• Place your fridge freezer where it will not
be exposed to direct sunlight.
•
Your fridge freezer must never be used
outdoors or exposed to rain.
•
Your fridge - freezer must be at least 50
cm away from stoves, gas ovens and
heater cores, and at least 5 cm away
from electrical ovens.
•
If your fridge freezer is placed next to a
deep freezer, there must be at least 2
cm between them to prevent humidity
forming on the outer surface.
•
Do not cover the body or top of fridge
freezer. This will affect the performance
of your fridge freezer.
• Clearance of at least 150 mm is required
at the top of your fridge - freezer. Do
not place anything on top of your
fridge - freezer.
•
Do not place heavy items on the
fridge - freezer.
• Clean the fridge - freezer thoroughly
before use (see Cleaning and
Maintenance).
• Before using your fridge freezer, wipe all
parts with a solution of warm water and
a teaspoon of sodium bicarbonate. Then,
rinse with clean water and dry. Return all
parts to the fridge freezer after cleaning.
•
Use the adjustable front legs to make
sure your fridge - freezer is level and
stable. You can adjust the legs by
turning them in either direction. This
must be done before placing food in the
fridge - freezer.
If your fridge - freezer includes a fan
condenser
-
If the bottom cabinet cover is the
plastic
The condenser of your fridge - freezer
is located at the bottom of the cabinet.
As a result, the fittings which control the
distance between the fridge - freezer
and the wall behind your fridge - freezer
are located on the cover of the bottom
of the cabinet. You can move your
fridge - freezer toward the back wall
until this point.
Plastic for distance setting
