8
INSTALLATION
Installing the cooker
The kitchen should be dry and airy
and have effective ventilation
according to the existing technical
The room should be equipped with a
ventilation system that pipes away
exhaust fumes created during
combustion.This system should
consist of a ventilation grid or hood.
Hoods should be installed according
to the manufacturer’s instructions.
The cooker should be placed so as to
ensure free access to control
elements.
Coating or veneer used on fitted
cabinets must be applied with a heat
resistant adhesive (100
℃
). This
prevents surface deformation or
detachment of the coating. If you
resistance, you should leave
approximately 2 cm of free a pace
around the cooker. The wall behind
the cooker should be resistant to
high temperatures.During operation,
its back side can warm up to around
50
℃
above the ambient temperature.
The cooker should stand on a hard,
750
even floor (do not put it on a base.)
provisions.
are unsure of your cabinets heat
Fix the cooker to the back wall with 2 chains
Anti tilt chains are located at the rear of the
appliance and must be secured to the wall
behind the appliance to prevent accidental
tipping/tilting. The chain length must be as
short as practicable to avoid appliance tilting
forward and also diagonal to avoid appliance
moving sideways.
