27
CLEANING AND MAINTENANCE
Removal
of
the
internal
glass
panel
Unscrew and unfasten the plastic latch that
is in the corner at the top of the door. Next
take out the glass from the second blocking
mechanism and remove.After cleaning,
insert and block the glass panel,and screw in
the blocking mechanism.
Removal
of
the
internal
glass
panel
Regular
inspections
Besides keeping the cooker clean, you
should:
●
Carry out periodic inspections of the
control elements and cooking units of the
cooker. After the guarantee has expired you
should have a technical inspection of the
cooker carried out at a service centre
at least once every two years.
●
Fix any operational faults.
●
Carry out periodical maintenance of the
cooking units of the cooker.
Caution !
All repairs and regulatory activities should
be carried out by the appropriate service
centre or by an appropriately authorized
fitter.
OPERATION
IN CASE
OF
EMERGENCY
In the event of an emergency, you should:
switch off all working units of the oven
Door
removal
In order to obtain easier access to the oven
chamber for cleaning , it is possible to
remove the door.
To do this, tilt the safety catch part of the
hinge upwards. Close the door lightly, lift
and pull it out towards you. In order to fit the
door back on to the cooker, do the reverse.
When fitting, ensure that the notch of the
hinge is correctly placed on the protrusion
of the hinge holder. After the door is fitted
to the oven, the safety catch should be
carefully lowered down again. If the safety
catch is not set it may cause damage to the
hinge when closing the door.
Tilting
the
hinge
safety
catches
Door
removal
