Award 486F39X, Руководство пользователя

Страница: 38 / 39

Password Setting
The “PASSWORD SETTING” utility sets the password. The
mainboard is shipped with the password disabled. If you want
to change the password, you must first enter the current
password. Then at the prompt, type your new password. The
password is case sensitive and you can use up to 8
alphanumeric characters. Press <Enter> after entering the
password. At the next prompt, confirm the new password by
typing it and pressing <Enter> again.
To disable the password, press the <Enter> key instead of
entering a new password when the “Enter Password” dialog
box appears. A message will appear confirming that the
password is disabled.
Note: If you forget your password, the only way to solve this
problem is to discharge the CMOS static memory by
removing the jumper shunt from pin 2 and pin 3 of JP4
(default setting), placing it at the position to short pin 1
and pin 2 of JP4 for 5 seconds, then recover it to its
default setting.
IDE HDD Auto Detection
If your system has an IDE hard drive, you can use this utility
to detect its parameters and enter them into the Standard
CMOS Setup automatically.
If the auto-detected parameters displayed do not match the
ones that should be used for your drive, do not accept them.
Press the <N> key to reject the values and enter the correct
ones manually on the Standard CMOS Setup screen.
34
486F38X
User’s Manual
.