Award 486F39X, Руководство пользователя

Страница: 34 / 39

Chapter 3: Software Guide
Power Management:
This setting controls the system Doze,
System Standby, and System Suspend Timer features. There are
four options.
User Define:
allow you to customize all power saving timer
features.
Optimize:
This is the recommended setting for general use.
Test/Demo: This is for test/demonstration purpose.
Disable: Disable the power management features.
PM Control by APM:
The default setting is “No”.
If set “Yes”, system BIOS will wait for APM’s prompt before it
enter any PM mode.
Note: If-your system power management is controlled by APM
and if there is a task running, even the timer is time out, the
APM will not prompt the BIOS to put the system into any
power saving mode.
Video Off Method:
This setting controls the Video off method in
power saving mode. The default setting is V/H SYNC+Blank.
This setting disables V/H SYNC signals and blank the screen i n
power saving mode. The other option is “Blank Screen”.
HDD Power Down:
Setting Range from “1 Min” to “15 Min”,
“Disable” and “When Suspend”. The IDE hard drive will spin
down if it is not accessed within a specified length of time. If
“When Suspend” is selected, the IDE hard drive spin down when
the system enters System Suspend mode.
System Doze:
Setting Range from “10 Sec” to “3 Hr” and
“Disable”. The system speed will change from turbo to slow if no
Power Management events occur for a specified length of time.
The system will return to full power when a Power Management
event is detected.
30 486F39X User’s Manual