Award 486F39X, Руководство пользователя

Страница: 35 / 39

Chapter 3: Software Guide
System Standby
: Setting Range from “10 Sec” to “3 Hr” and
“Disable”. The CPU and VESA Local Bus operating frequency
slows down to 8MHz and the Video signal is suspended if no
Power Management events occur for a specified length of time.
Full power functions return when a Power Management event is
detected.
System Suspend:
Setting Range from “10 Set” to “3 Hr” and
“Disable”. The VESA Local Bus operating frequency slows down
to 8MHz, the CPU clock is stopped, the video signal is suspended,
and the “SM Outs” (JP2, JP3) are drived to logic low, if no Power
Management events occur for a specified length of time. Full
power functions return when a Power Management event is
detected.
Local Master
: The default setting is “Enable”. This makes the
chipset to monitor VESA Bus Master card activity such as SCSI
card.
Local Device:
The default setting is “Disable”. This makes the
chipset to monitor VESA Bus-Slave card activity such as VESA
VGA card or VESA IDE Card.
Video Activities:
The default setting is “Disable”. When enabled,
the Video display activity will be monitored.
DMA Activities:
The default setting is “Enable”. This makes the
chipset to monitor DMA transfer activity.
IRQ 1-15:
These features determine which IRQs are monitored. If
you are not sure which IRQs should be monitored, just enable
every IRQ except IRQ8. IRQ8 can only be enabled under OS2
Operating System.
Non-SL CPU
If your CPU type is Non-SL, the menu will look like this after
selecting Power Management setup from the main program
screen.
486F39X User’s Manual
31