Avvio 490, Руководство пользователя

Страница: 6 / 17

4
3. When prompted heavy lose new PIN2 code, enter new PIN2 code again.
* PUK2 code
PUK2 code (PIN2 code unlock password, 8 bits) used to unlock live PIN2 code.PUK2 code with USIM/SIM card provided by the
manufacturer.If did not provide, please contact to provide you with services of network operators.If you input the wrong PUK2
code ten times, you will not be able to use need PIN2 code function, if use these features, contact network operators need to
change the new card.
* password ban
Using a call limit function, will be used password is prohibited.You when applying for the network function, can be obtained
from network operators to the password.
* phone password
Is mainly used to protect users' privacy is being violated, can be in the menu "Settings - > security - >" screen lock into the set.
Not that all users can enter to the main interface.
Slide: users only need to gently slipped to enter to the main interface.
Face unlock: users can through the face is to unlock screen to the main interface
Voice to unlock: the user can unlock by voice commands to the main interface
Design: the user can in the rectangle icon by using a 3 X 3 consecutive connection after at least four buttons, a design can set
the password.
PIN: the user can enter at least four Numbers can complete set.
Password: the user must enter at least four and contains at least one letter can complete set of characters.
After completion of the above Settings, the user each time all needs to input the corresponding password to enter the system
boot, except the slide to unlock, if password input error number for more than five times, will be locked for 30 seconds, 30
seconds to enter again.
3.2
Storage device
T - FLASH card is located in the internal pluggable mobile phone memory card, when the mobile phone function and enable
USB storage and computer connected after transmission from the computer to the phone in the data files can be stored in the
T - FLASH card, or T - file transfer of data in the FLASH card into the computer.
Mobile phones with USB data cable connected to the computer USB interface is correct, the screen will pop up box "USB
mass storage device", below open "USB storage devices" can set the phone to mobile hard disk storage device that can upload
download function.
Note: remove and insert T - before the FLASH card, please confirm whether the phone was turned off.
3.3
battery charge
This machine with lithium ion batteries apart can be used after packaging.The first three time charge in electricity
thoroughly after use, please fully filled again, to give the best state of battery.
3.3.1 battery indicator
Your mobile phone can monitor and display the information of the battery.
1. Normally you can see the battery from the display battery icon in the top right corner of the remaining power.
2. When the battery is insufficient, the screen shows "please connect your charger.
3. When the battery is charging, charging status animation, stop charging animation and the lock screen interface display
"is full of" charging is complete.
4. For other related parameters of battery and charger, please see the material object.