3
2.
In China at present the domestic various operators do not provide PIN2 and PUK2 code.The need to use the above password
function in the cell phone may not be able to use, please the user attention.
3.
Turn off the phone and in a few seconds, and then pull out or insert SIM/USIM card, do not dial out in the process of cell
phone use normally or insert SIM/USIM card.
4.
Please be careful operation USIM/SIM card, friction or bent easy to damage the SIM/USIM card.
5.
Please note that the SIM/USIM card in the mobile phone and its accessories such as keep small parts, and in the place out of
reach of children, normal temperature to room temperature is 25 degrees, the highest working environment temperature of 40
degrees, the minimum temperature of 0 degrees in work environment.
3.1.1 Installation steps
Steps as follows:
1.
Turn off the phone and remove the battery.
2.
Select USIM/SIM card place holder.According to the direction of the slot icon to push the SIM/USIM card carefully into the
slot of a SIM/USIM gets stuck.
3.
Make sure that a SIM/USIM card after making the proper installation and battery assembly, close the back cover.
3.1.2
Use the password
Your mobile phone and USIM/SIM CARDS have many passwords.These password helps prevent cell phones and USIM/SIM card
stolen.When entering the following mention any password, enter the correct password and press the virtual keyboard keys.If
an error occurred when the input, please first press the virtual keyboard clear button to delete the incorrect input, and then
input the correct number.Can use a function table "security - > set SIM card lock/screen lock" to modify or open the PIN
number and mobile phone password.
*
PIN code
PIN (personal identification number, 4 to 8 bits) used to prevent your SIM/USIM card has been unauthorized use.PIN usually
SIM/USIM card provided by the network operator.If launched the PIN test function, each time will be asked to input PIN when
the phone is switched on.If you lose the wrong PIN number three times, SIM/USIM card will be locked and unlock method is as
follows:
1.
Press the screen prompt enter the correct PUK code, to unlock the SIM/USIM card.
2.
Then enter the new PIN.
3.
When prompted heavy lose new PIN number, enter the new PIN again.
4.
If PUK code is correct, then unlock SIM/USIM card, PIN has been reset.
Note: lose the wrong PIN number three times, SIM/USIM card will be locked, need the PUK code to unlock it.PUK code
generally stored in the network operators.
*
PIN code
PUK code (PIN unlock password, 8) for solution of lock PIN.PUK code with USIM/SIM card provided by the manufacturer.If did
not provide, please contact to provide you with services of network operators.If you input wrong PUK code ten times, the
SIM/USIM card fails, contact network operators need to change the new card.
*
PIN2 code
PIN2 code (4 to 8) provide with a SIM/USIM card is used to set the "call" and "fixed dialing", etc.Please contact the network
operator to determine whether your USIM/SIM card support these functions.If you lose three times wrong PIN2 code, PIN2
code will be locked, only after the input the correct PUK2 code can make PIN2 code to unlock.Unlock method is as follows:
1.
According to the screen prompts for correct PUK2 code, to unlock.
2.
Then enter the new PIN2 code.
Содержание 490
Страница 1: ...Avvio 490 Avvio 490S The manual ...
