Remote control
The layout of the OSD will change depending on the input that is selected.
HDA1/HDA2 Input Configuration
1. Picture
POWER
Turn on & off the monitor
MENU
Display or exit the main menu
VIDEO/UP
VIDEO Source switching / Cursor
up when OSD appears
MODE/DWON
MODE no effect / Cursor down
when OSD appears
LEFT
Enter the sub-menu to reduce the
value
RIGHT
Enter the sub-menu to increase the
value
Picture
Brighten
ss
50
Menu
Contrast
50
Information
on
Saturate
on
50
Hue
50
Exit
Picture:
Setting the image brightness (0-100).
Contrast:
Setting the image contrast (0–100).
Saturation:
Setting the image Saturation (0–100).
Hue:
Setting the image hue (0–100).
Picture
Language
English
Menu
OSD H Pos.
50
Information
OSD V Pos.
50
OSD Time
20
Reset
>
Exit
2. Menu
Language:
OSD language selection.
OSD H Pos.:
OSD horizontal position adjustment (0-100).
OSD V Pos.:
OSD vertical position adjustment (0-100).
OSD Time:
OSD display dwell time selection (5-30s).
Reset:
OSD setting data recovery factory settings.
3. Information
Display information about the current source.
Picture
Menu
HDA1
Information
CVI
720P25
Exit
