DVR User Manual
19
Step 2
: Checkmark record and audio.
Step 3
: Select All to setup the same settings for all channels.
4.3.2 Record Bitrate
Step 1
: Enter into Menu
Setup
Record
Record Bitrate. Refer to Fig 4-11:
Step 2
: Setup rate, resolution, quality, encode and max bit stream.
Step 3
: Select “All” to set the same settings for all channels.
Step 4: Click “Apply” button to save the setting.
Fig 4-11 Record Configuration-Record Bitrate
4.3.3 Time
Step 1
: Enter into Menu
Setup
Record
Time interface to set recording time. Refer to Fig
4-12:
Step 2
: Set Pre-alarm record time and post-alarm record time. Select “All” to set the same
settings for all channels.
Parameter
Meaning
Record
To enable/disable recording for the channel
Audio
To enable/disable audio recording for the channel
Parameter
Meaning
Rate
Range from: 1-15
(
NTSC
)
1-12(PAL)
Resolution
Supports 1080P.
Quality
The higher the value is, the clearer the recorded image is. Six
options: lowest, lower, low, medium, higher and highest.
Encode
VBR and CBR
Max bit stream
Range from: 1536kbps~12288kbps