DVR User Manual
26
color and time (day or night), you can adjust its value according to the practical conditions.
Left click the grid and drag to delete area. Click
icon to set the whole area as detection
area. Click
icon to clear the set detection area. Click
icon to test the sensitivity as
per the local conditions. Once motion is sensed, it displays a figure icon. Click
icon, to
save the setting. Click
icon to exit the current interface.
Note:
Prior to setting motion detection field it is recommended that you click
icon to clear the existing field and set afresh.
Step 6
: Select “All” to set the same settings for all channels.
Step 7
: Click “Apply” button to save the setting.
Step 8
: Enter into Schedule tab. The setting steps for schedule for motion based alarm are
similar to normal schedule setup (see Chapter 4.4.1 for more details).
4.5.3 Video Loss
This DVR can be set up to detect video loss. The setting steps are as follows:
Step 1
: Enter into Menu
Setup
Alarm
Video Loss. Refer to Fig 4-21:
Step 2
: The setup steps of video loss trigger are similar to “Alarm Handling” (See Chapter
4.5.1 Sensor
Alarm Handling setting for more details).
Fig 4-21 Alarm Configuration-Video Loss
4.5.4 Other Alarm
This tab gives a choice to configure alarm for Disk Full, IP Conflict, the Disconnect event,
Disk Attenuation or Disk Lost.
Step 1
: Enter into Menu
Setup
Other Alarm. Refer to Fig 4-22:
Step 2
: Use the dropdown menu and select the event or the alarm.
Step 3
: Check the required trigger options.
If the selected event is “Disk Full”, then use the drop down box for “Disk Shortage Alarm” to
choose a threshold value for remaining HDD space. If the threshold value is reached, the
system will trigger the Disk Full Alarm.
