Avtron Model T477W Bonding Meter
with B14703 Battery Pack Replacement Instructions
Part Number T477WC15292
ESD Precautionary Guidelines
Subject to the EAR, ECCN [9E610.a].
This information is subject to the export control laws of the United States, specifically including the Export Administration Regulations (EAR),
15 C.F.R. Part 730 et. seq. Transfer, retransfer, or disclosure of this data by any means to a non-U.S. person (individual or company), whether in the United States or abroad, without any
required export license or other approval from the U.S. Government is prohibited, including without limitation any diversion to a military end user or use in a military end use application.
9-1
9
ESD PRECAUTIONARY GUIDELINES
C A U T I O N
Certain circuit card assemblies and their components, typically integrated circuits, may be
damaged by seemingly undetectable electrostatic discharge (ESD). Care must be exercised during
handling/repair of these items. Use electrostatic discharge precautionary procedures.
The following guidelines are not necessarily all inclusive but rather serve as reminders for good shop practices for the handling/ repair
of ESD sensitive circuit card assemblies and devices.
•
Store ESD sensitive items in their original containers. These items are often marked with the symbol shown at the top of this
page.
•
Put on a grounded wrist strap before handling any ESD sensitive item.
•
Clear work area of Styrofoam®*, plastic, and vinyl items such as coffee cups.
•
Handle ESD items by the body, never the open edge connectors.
•
Never slide ESD sensitive items over any surface.
•
Transport ESD sensitive items in a static shielding container to a static-free work station.
•
If a static-free work station is not available, ground the transport container before removing or inserting an ESD item.
•
Electric tools used during repair should be grounded. For example, use only anti-static type solder suckers and grounded tip
soldering irons. Discharge non-electric tools before use.
•
Pack ESD items in static shielding containers before shipping them to Avtron for repair.
* Styrofoam® is a registered trademark of Dow Chemical.
