Room Alert 32E
26
AVTECH Software, Inc.
3.
Enter values in the “High” and “Low” field to set high and low temperature and humidity
thresholds. Your Room Alert will generate alerts in response to these thresholds.
4.
Enter a value in the “Adjust” field to calibrate the Internal Temperature & Humidity
Sensor if its readings differ from known values at that location.
5.
In “Use Alarm Profile,” which controls devices connected through the Light Tower &
Relay Adapter Ports, you may leave the default, “Profile 1,” or choose another profile
from the drop-down menu.
6.
Click
Accept Changes
at the bottom of your screen to temporarily save your settings.
You may now navigate to another screen; however, if you close the web interface before
the next step, you will lose your changes.
7.
Click
Save Settings
in the navigation bar to the left of your screen. Your Room Alert
32E will automatically reboot and commit your changes.
Sensor 1 – 8 Alarm Configuration (External Digital Sensors)
You may configure alert thresholds for the eight (8) external digital sensors in the “Sensor 1–8
Alarm Configuration” fields.
In the sample screen below, you see the included external Digital Temperature Sensor in Sensor
1 (which corresponds to the 1
st
digital sensor port). Sensors 2 and 3 are shown in their default
state when those digital ports are unused. Sensors 4 through 8 are not shown.
Notice that the web interface detects the type of digital sensor automatically and enters it in
“Sensor Type.”
Configure Alarm Profiles in the Alarm Options screen of your
web interface. Refer to the
Alarm Options
section in this manual
for detailed instructions.
NOTE
Refer to the
Advanced
section in this manual for instructions on
setting the default temperature scale.
NOTE