Room Alert 32E
AVTECH Software, Inc.
13
Current Sensor Status Bar
Below the Status tab is the “Current Sensor Status Bar,” where you may view basic information
about your Room Alert 32E and make temporary adjustments to the sensor display.
You may find your Room Alert 32E’s name, current date & time, and MAC address
here.
To determine if your Room Alert 32E’s firmware is current, you may click
Room
Alert 32E vX.X.X
at the right.
To temporarily modify the refresh interval of the “Status” screen while viewing,
which is 60 seconds (i.e., every 1 minute) by default, you may enter a value in
seconds in the “Update Every” field. Click outside the field to temporarily commit the
change.
To temporarily toggle the temperature scale between Fahrenheit (F) and Celsius (C),
click
Fahrenheit
or
Celsius
.
TIP
Your Room Alert 32E must be connected to the internet to
check firmware versions.
Refer to the
Advanced
section in this manual for instructions on
setting the default status page refresh rate and temperature
scale for Room Alert 32E.
NOTE