AVTECH Software, Inc.
Page 35
AVTECH.com
Room Alert S Models (RA32S-DAP-RAS & RA12S-DAP-RAS)
the
Status
screen to refresh at. You may enter a value from 1 to 255. The default is
5 seconds.
• In
Web Port
, you may change the port number your web browser uses to connect
to your Room Alert’s web interface. By default, it uses port 80 for HTTP and port
443 for HTTPS.
• To change the web port, select the
Custom Web Port
checkbox above the
Web
Port
field.
• Select the
Enable HTTPS
checkbox to enable your Room Alert to use HTTPS for its
local web interface. When enabled, your Room Alert Monitor’s local web interface is
secured by an SSL certificate issued to *.roomalertmonitor.com.
• In
Temperature Scale
, you may choose
Fahrenheit
or
Celsius
from the drop-down
list.
Fahrenheit
is the default.
Date & Time Configuration
In
Date & Time Configuration
, you may configure the date and time defaults for your Room
Alert.
• In
Time Zone
, select your time zone from the drop-down list. (GMT) Greenwich
Mean Time is the default.
• In
Time Display
, you may select the AM/PM or 24 hour format from the drop-down
list. The 24 hour setting is the default.
• In
Time Format
, you may select either the MM/DD/YY or DD/MM/YY date format
from the drop-down list. Month first (MM/DD/YY) is the default.
• Select
Enable Daylight Savings
if you would like your Room Alert time setting to
compensate by +1 hour for daylight savings time.
Time Server
By default, Room Alert uses the Network Time Protocol (NTP) server, time.nist.gov. In the
Time Serve
r sub-section, you may choose to use a custom time server.
•
To use a different time server, select the
Use custom time server
checkbox.
• In
Domain Name/IP
, enter your time server’s domain name or IP address.
• In
Auto Refresh
, you may select how often Room Alert automatically synchronizes
with your time server. You may leave the default, 24 Hours, or choose another
interval, as frequent as 10 minutes, from the drop-down list.
Trace Configuration
You may configure your Room Alert for trace output, which is useful for troubleshooting.
Trace output shows the communication between your Room Alert and your mail server, as
well as other information, such as the current firmware version, IP address, MAC address,
and requests to web pages.
