-2-
4. BASIC OPERATION
4.1 Recording
This device offers non-stop recording mode. If the power is off accidentally, the recorded video data will not be lost
and is safely stored in the HDD. The device will return to the original recording status after the power is on again.
When the HDD is full, this device will overwrite 8GB data from the oldest for continuous recording without notice.
1) Continuous Recording Symbol
When the DVR is properly connected with camera, you can see the sign “
” on the screen.
2) Event Recording Symbol
When the motion / alarm detection is activated, once motion or external alarm happens, you will see the sign
“
” (motion) or “
” (external alarm) on the screen.
Note: The audio source connected to the “Audio 1” will be recorded with the video of the “CH13”.
The audio source connected to the “Audio 2” will be recorded with the video of the “CH14”.
The audio source connected to the “Audio 3” will be recorded with the video of the “CH15”.
The audio source connected to the “Audio 4” will be recorded with the video of the “CH16”.
4.2 Playback
Press “
LATEST
” button on the DVR control panel, and the device will playback the latest recorded video.
Note:
There must be at least 8192 images of recorded data for playback to work properly. If not, the
device will stop playback. For example, if the IPS is set to 30, the recording time should be at least
273 seconds (8192 images / 30 IPS) for the playback to work properly.
Playback related operations are described below:
1) Fast Forward (
►►
) / Fast Rewind (
◄◄
)
You can increase the speed for fast forward and rewind on this device. In the playback mode:
Press “
►►
“ once to get 4X speed forward and press twice to get 8X speed, etc. And the maximum speed is 32X.
Press “
◄◄
“ once to get 4X speed rewind and press twice to get 8X speed, etc. And the maximum speed is 32X.
2) Pause
( ) / Image Jog
Press “ ” button to pause the playback.
In the Pause mode:
Press “
►►
” button once to get one frame forward.
Press “
◄◄
” button once to get one frame rewind.
3) Stop
Pressing “STOP” button under playback mode, the screen of this device will return to live monitoring mode.
4) Slow
Playback
Press “SLOW” button to get 1/4X speed playback and press twice to get 1/8X speed playback.
5) Audio Playback (
/
)
Use these two buttons to select the live or playback sound of the audio channels.
Icon “
” means: Live audio of the 1
st
audio channel / Icon “
” means: Playback audio of the 1
st
audio channel
Icon “
” means: Live audio of the 2
nd
audio channel / Icon “
” means: Playback audio of the 2
nd
audio channel
