AVTECH Software, Inc.
Page 5
AVTECH.com
Configure Your GSM Modem
a. In the
External Modems
page, locate the
GSM Modem
section.
b. In
Service Center #
, enter your cellular service provider’s service center number.
c. In
Test Phone #
, enter a phone number to send a test message to once you’ve
finished configuring your modem.
d. In
COM Port
, select the port that your modem is using on Device ManageR’s host
system. (You found this number in
Step 2: Check your modem’s COM port number.
)
e. In
Baud Rate
,
Data Bits
,
Stop Bits
and
Parity
, select the following:
Baud Rate
: 115200
Data Bits
: 8
Stop Bits
: 1
Parity
:
None
f. Leave
GSM Advanced Settings
at the default. This section contains the script that
Device ManageR uses to send notifications.
5. Select
Save Settings
to save your changes.
6. Then select
Test GSM Modem
to send a test message to the number you entered in
Test Phone #
.
AVT-171211-2.1.0
