Avtech AVZ592, Руководство по настройке системы, Страница: 23 / 56

20
4.3 System configuration
Click “Config.” to enter the configuration page.
Note: You need to be “Supervisor” to enter the system configuration page. If you’re not a
“Supervisor”, please re-log into the camera with the correct user name and password.
Main Menu Sub-Menu Reference
Network Network Configure network settings.
QoS Limit the data flow for live streaming.
DDNS Enter DDNS information when the network type is PPPOE or DHCP.
SNTP Synchronize your camera time with the networked computer systems.
FTP
Enter the FTP information for event notifications when “FTP” is
chosen in “Trigger”
→
“Trigger”.
Mail
Enter Email information for event notifications when “Email” is chosen
in “Trigger”
→
“Trigger”.
SMS
Enter text messaging information for SMS notifications when “SMS” is
chosen in “Trigger”
→
“Trigger”.
Filter
Choose to permit or block the IP address(es) which can access this
camera.
UpnP
*Suitable for Windows-based operating system.
Allow this camera to be detected among devices within the same
network area for easy and quick usage.
Bonjour
*Suitable for Apple Mac-based operating system.
Allow this camera to be detected among devices within the same
network area for easy and quick usage.
RTP
Set the parameters for video data transmission when you’re using
multimedia other than web browsers and Video Viewer for remote
access.
SNMP
Configure SNMP to remotely manage network devices.
IEEE 802.1X
The settings here enable the camera to access a network protected
by 802.1X/EAPOL (Extensible Authentication Protocol Over LAN).
Network Share
Assign a location in the LAN environment to save the snapshot of
events when “Network Share” is chosen in “Trigger”
→
“Snapshot”.
Network Failure Detection
Configure this camera to check the network connection of other
device periodically, and send notifications via Email or FTP for
disconnection events.
Camera Camera
1. Set the camera title.
2. Specify the display position of the camera title.
3. Specify where the snapshot files should be saved.
Preset
Set the preset points for the DPTZ function.
Cruise
Set the cruise mode when the auto mode is enabled: Sequence or
Auto Pan.
Auto Tracking Set the surveillance area for auto tracking, and the tracking timeout.
Video Adjust video-related settings in different video format.
ROI Select a specific area to reinforce the image quality of that area.
Color
Adjust the color performance.
Audio*
Adjust the audio volume of the microphone and speaker.
Advanced
Adjust the camera parameters if necessary.
Home
Configure the camera to return to the specified point or specific cruise
action when the camera is not in use for a specific time.