9
3. CAMERA CONFIGURATIONS – TVI DVR
NOTE:
The method below is available only when the camera is used with our brand’s TVI DVR.
On the DVR live view, right click to show the main menu, and select
ADVANCED CONFIG
DCCS
.
Then, select the channel which connects this camera, and click
SETUP
to enter the menu of camera
parameters.
ADVANCED CONFIG
CAMERA
CH1 CH2 CH3 CH4
DETECTION
MENU SETUP
ALERT
NETWORK
DISPLAY
RECORD
DEVICES
F.W. 1017
DCCS
DEVICE AVTXXX
NOTIFY
CONNECTION OK
EXIT
Item
Description
BRIGHTNESS
Click the current value to manually adjust the brightness of the image. The higher the
value, the brighter the image.
CONTRAST
Click the current value to manually adjust the contrast of the image. The higher the
value, the higher the contrast ratio.
HUE
Click the current value to manually adjust the hue of the image.
SATURATION
Click the current value to manually adjust the saturation of the image. The higher the
value, the more saturated the image.
CAMERA GUARD
Enable “GUARD LOCK” to temporarily disable the pan function of this camera and fix
the camera surveillance area.
For details, please refer to the section “CAMERA GUARD”.
CRUISE MODE
Select the cruise mode when the
is selected in the PTZ mode. There are three
options: AUTO PAN, SEQUENCE and CRUISE.
AUTO PAN:
Pan within the range specified in
CRUISE CONFIG
.
SEQUENCE: Patrol based on the sequence group specified in
CRUISE CONFIG
.
CRUISE:
Patrol based on the route recorded in
CRUISE CONFIG
.
CRUISE CONFIG
The setting shown here depends on what you selected in
CRUISE MODE
:
AUTO PAN:
Specify the range for auto pan to run.
For details, please refer to the section “AUTO PAN SETUP”.
SEQUENCE: Configure a sequence group for area patrol.
For details, please refer to the section “SEQUENCE SETUP”.
CRUISE:
Customize the patrol route in 200 seconds.
For details, please refer to the section “CRUISE SETUP”.
AUTO TRACKING
Set the surveillance area for auto tracking, and the tracking timeout.
For details, please refer to the section “AUTO TRACKING SETUP”.
DISPLAY ZOOM RATIO
Select “ON” to show the zoom ratio on the live view.
PAN SPEED
Set the speed for pan movement.
TILT SPEED
Set the speed for tilt movement.
SPEED BY ZOOM
Select “ON” to automatically adjust the moving speed of the camera in each zoom
ratio. In another word, the moving speed in different zoom ratio is different.
HOME
Configure this camera to always return to a specific point when the camera is not
operated for the specified time.
For details, please refer to the section “HOME SETUP”.
VIDEO FORMAT
Select the video format: NTSC / PAL.