Avtech AVP321Z, Руководство пользователя

Страница: 26 / 33

MAIN MENU – MODE
-22-
8.4 Tracking Setup
The speed dome camera will automatically aim
and follow the largest movement in the monitoring view,
making the camera pan (max. 360º) & tilt (max. 90º)
within: (1) the camera's pre-defined surveillance area /
(2) the pre-defined tracking timeout.
M
M
O
O
D
D
E
E
1 Reset Default =LIMIT=
2 Pan / Tilt Speed 60°
3 Preset Setup =TIME=
4 Tracking Setup 5 s
5 Home Position =Mode=
6 Auto Focus Normal
7 Calibration
8 Auto Scan
9 Auto Mode
8.4.1 Set the Pre-defined Surveillance Area
(=LIMIT=)
When the locked target is out of the pre-defined
surveillance area, the camera returns to the point it
originally monitors after the preset tracking timeout.
Move to “=LIMIT= ”, and use the right key or
－
/
＋
on the keyboard controller to set the tracking
surveillance area angle (60° / 120° / 180° / Full /
Manual). The default surveillance angle is 60°.
You can choose the pre-defined surveillance area
angle, 60° / 120° / 180° / Full (360°). For example,
when 60° is selected and the auto tracking is activated,
the surveillance area will be the area starting from the
center of the focus, 30° to the left, and 30° to the right.
You can also customize the surveillance area by
selecting “Manual”. Move to “Manual”, and press
to enter the setting page.
1) Move to one point as the start of the surveillance
area, and press to set as “LIMIT1”.
2) Move to another point as the end of the surveillance
area, and press to set as “LIMIT2”.
3) Move to “EXIT” and press to leave the setting
page.
8.4.2 Set the Pre-defined Tracking Timeout
(=TIME=)
When the locked target stops moving longer than
the pre-defined tracking timeout, the camera returns to
the point it originally monitors after the preset tracking
timeout.
Move to “=TIME= ”, and use the right key or
－
/
＋
on the keyboard controller to set the tracking
time-out in seconds (5 s / 10 s / 15 s / 20 s / 25 s / 30 s /
35 s / 40 s / 45 s / 50 s / 55 s / 60 s /
∞
s). The
default tracking timeout is 5 seconds.
8.4.3 Select the Auto Tracking Mode (Mode)
Two options are available: Normal and P Only.
(1) When “Normal” is selected, the auto tracking
function will be activated with pan and tilt
movements.
(2) When “P Only” is selected, the auto tracking
function will be activated with only the pan
movement.