Avtech AVM5447, Руководство по эксплуатации

Страница: 12 / 64

7
3. CAMERA CONFIGURATIONS
Users can further configure this network camera by accessing via Internet Explorer.
3.1 System configuration menu
Click
Config.
to enter the configuration page.
The functions are categorized into seven menus: Network, Camera, ONVIF, Record, Storage, Trigger and
General.
 For details about “Network”, please refer to “3.2 Network” at page 9.
 For details about “Camera”, please refer to “3.3 Camera” at page 15
 For details about “ONVIF”, please refer to “
3.4 EVENT
” at page 21.
 For details about “Record”, please refer to “3.5 Record” at page 21.
 For details about “Storage”, please refer to “3.6 Storage” at page 22.
 For details about “Trigger”, please refer to “
3.7 Trigger
” at page 22.
 For details about “General”, please refer to “
3.8 General
” at page 26.
Main Menu Sub-Menu Reference
Network Network Configure network settings.
QoS Limit the data flow for live streaming.
DDNS Enter DDNS information when the network type is PPPOE or DHCP.
SNTP Synchronize your camera time with the networked computer systems.
FTP
Enter the FTP information for event notifications when
FTP
is chosen in
Trigger
→
Trigger
.
Mail
Enter Email information for event notifications when “
Email
is chosen in
Trigger
→
Trigger
.
SMS
Enter text messaging information for SMS notifications when
SMS
is chosen in
Trigger
→
Trigger
.
Filter Choose to permit or block the IP address(es) which can access this camera.
UPnP
*Suitable for Windows-based operating system.
Allow this camera to be detected among devices within the same network area for easy and
quick usage.
Bonjour
*Suitable for Apple Mac-based operating system.
Allow this camera to be detected among devices within the same network area for easy and
quick usage.
RTP
Set the parameters for video data transmission when you’re using multimedia other than web
browsers and Video Viewer for remote access.
SNMP Configure SNMP to remotely manage network devices.
IEEE 802.1X*
The settings here enable the camera to access a network protected by 802.1X/EAPOL
(Extensible Authentication Protocol Over LAN).
Network Share
Assign a location in the LAN environment to save the snapshot of events when
Network
Share
is chosen in
Trigger
→
Snapshot
.
Network Failure Detection
Configure this camera to check the network connection of other device periodically, and send
notifications via Email or FTP for disconnection events.
Camera Camera
1. Rename the camera.
2. Change the place where the camera name is shown on the screen.
Video Adjust video-related settings in different video format.
ROI Select a specific area to reinforce the image quality of that area.
Color Adjust the color performance.
Audio* Adjust the audio volume of the microphone and speaker, and configure audio detection.
Advanced Adjust the camera parameters if necessary.
Privacy Mask* Cover certain areas on the camera image.
ONVIF Event
This function is used to integrate the functions of event and alarm detection when this camera
has to work with other ONVIF-compliant device.
Record* Record Configure the record function.
Record Timer Schedule external alarm recording.
Storage* Memory Check the current storage capacity and clear all recorded data when needed.
*Selected models only