1
1. CAMERA NETWORK CONFIGURATIONS
Please follow the instructions below to finish camera installation and network configurations.
You may configure the network connection of this network camera with your laptop / computer, or with your iPhone®
or iPad® based on your network environment.
1.1 Cable Overview
1.2 Assemble & Install Camera
Step1: Paste the installation sticker supplied with the camera to where to install the camera, and position the four
holes for screws. Drill the two screws at top to the wall. ( and as shown below)
Note: Please leave some space between the screws and wall. Do not get them to the end
Step2: Hang the camera at the screws you just fixed,
and make sure the camera stays in place.
Step3: Decide the cable direction (up / down) before
you fasten the screws tight to the wall.
Step4: Drill the rest of screws into the wall. After that, make sure all screws are fastened.
Step5: Adjust the angle of the camera (up / down / left / right) with the supplied wrenches for better viewing.
