Avtech 14260 Скачать руководство пользователя

Страница: 7 / 54

packages, DO-style packages with leads bent at 90°, and standard and reverse-polarity

TO-3 packages.

Other test jigs, accommodating different packages, are also available.

While the provided test jig is intended to be flexible and easy to use, users can also

develop their own test jigs easily.

The AVR-EBF6-B includes an internal trigger source, but it can also be triggered or

gated by an external source. A front-panel pushbutton can also be used to trigger the

instrument.

The AVR-EBF6-B features front panel keyboard and adjust knob control of the output

pulse parameters along with a four line by 40-character backlit LCD display of the

output amplitude, pulse repetition frequency, and delay. The instrument includes

memory to store up to four complete instrument setups. The operator may use the front

panel or the computer interface to store a complete “snapshot” of all key instrument

settings, and recall this setup at a later time.

This instrument is intended for use in research, development, test and calibration

laboratories by qualified personnel.

Содержание 14260






















































Результаты поиска

Содержание 14260

Отзывы:

Похожие инструкции для 14260

Бренды по названию

Популярные бренды

Avtech 14260, Инструкция по эксплуатации

Результаты поиска

Содержание 14260

Отзывы:

Похожие инструкции для 14260

Бренды по названию

Популярные бренды