6)Replace the standard relay with the upgrade
LED relay: Unplug the OEM relay and pull up to
remove it.
7) Remove the OEM Fender: 1) Unplug the four
electric connectors. 2)Unscrew the four 5mm
hex bolts.
8) Remove Top Light cover by pulling up on it(its
secured with Velcro) and lower the OEM fender
out of the way. *please note how the wires are
routed in order to reinstall the new ones
properly.
9) Remove the OEM tail light by unbolting the
two 10mm bolts. You will reuse these bolts, the
nut bracket that they screw into, as well as the
rubber inserts from the OEM light to assemble
your new LED tail light in the next step.
10)Assemble the upgraded LED tail light as
pictured by reusing the OEM tail light bolts, the
nut bracket that they screw into, as well as the
rubber inserts(to take these out of the OEM
light you will first need to first take out the
#1
#2
Two of the connectors are
under the seat.
