metal insert out of the rubber portion. Do not
reuse the metal portion of the inserts)that you
removed in the previous step. Note that you do
add the supplied plastic bracket to the bottom
of the assembly.
11) Install your licenses plate on the licenses
plate holder. Align the tail light assembly to the
licenses plate holder and put one of the
supplied bolts through the bottom. Start to
align the fender eliminator into the proper
location on the bike. Feed the electrical cable
through into the original location.Secure fender
eliminator in place with the supplied bolts.
12) Connect the electric connectors:
1)rectangular white tail light harness(with 3
wires) 2) white rectangular plug to black
rectangular plug.3)orange plug to black plug 4)
light blue plug to gray plug.
13) Reinstall the tail light cover and reposition
both the rear fairings into place on the bike.
You will need to squeeze together the fender
eliminator and the rail light cover to get the
rear fairings to slip on with the rear garment.
#1
#2
#3
#4
