AVT MAGIC THipPro, Руководство по оборудованию

Страница: 11 / 40

PAGE 11
S a f e t y
S A F E T Y
Introduction
The unit described is designed to the latest technical parameters and complies
with all national and international safety requirements. It operates with a high
level of operational safety resulting from long development experience and
stringent quality control in our company.
In normal operation this equipment is safe.
There are, however, some potential sources of danger that cannot be com-
pletely eliminated.
This Operator Manual therefore contains basic safety instructions that must
be observed during system configuration and operation. The Operator Man-
ual must be read before the system is used and the current version of the doc-
ument must always be kept close to the equipment.
General safety requirements
In order to keep the technically unavoidable residual risk to a minimum it is
imperative to observe the following rules:
– Transport, storage and operation of the unit/system must be under the
permissible conditions only.
– Installation, configuration and disassembly must be carried out only by
trained personnel and with reference to the respective documentation.
– The system must be operated by knowledgeable and authorised users
only.
– The system/unit must not be operated unless it is in good working order.
– Any conversions or alterations to the system or parts of the system (includ-
ing the software) must be carried out by qualified personnel from the man-
ufacturer or by expert personnel authorised by our company.
All alterations carried out by other persons lead to a complete exemption
from liability.
– The removal or disabling of safety measures, the correction of faults and
errors, and the maintenance of equipment must be carried out by specially
qualified personnel only.
– Non-system software is used at one‘s own risk. The use/installation of
non-system software can adversely affect the normal functioning of the
system.
– Only use tested and virus-free data carriers.