AVT MAGIC THipPro Lite, Руководство по настройке

Страница: 85 / 158

▪
ON AIR SHARING: By default a line which is ON AIR
can only be operated by the client who put it ON
AIR. Enable this option if other clients should be
able to operate the line as well.
▪ STUDIO N VOICE DISGUISE: If enabled, the voice of
all callers to that studio is disguised. The strength
of that effect can be configured on the SIGNAL
PROCESSING configuration page.
▪
CHANNEL ASSIGNMENT: Assign telephone lines to
the available studios. Channels can be exclusive
to one studio or shared by two studios.
▪
AUDIO LINE ASSIGNMENT: Define which audio
interfaces are used for ON AIR, HOLD, and
PRETALK. As well as client or audio interface
specific settings.
▪ STUDIO: Select which studio a client can use. The
default studio is determined by the position of the
client in the CLIENTS / SECURITY list. Access to the
other studio can be granted optionally.
▪
AUDIO LINE: Displays the name of the audio line.
▪ PRETALK <client>: The PRETALK audio line of the
<client>.
▪ ON AIR N: An ON-AIR audio line which is usually
connected to a fader of the mixing console.
▪
HOLD / MONITORING:
▪
The input audio signal can be used as the HOLD
signal for all lines of the studio. Further
configuration is necessary on the HOLD SIGNAL
configuration page.
▪
The output audio signal can be used to monitor
audio signals of the MAGIC THipPro Lite. Further
configuration is necessary on the MONITORING
SOURCE configuration page.
▪ AUDIO INTERFACE: Assign an audio interface to
each audio line.
▪ NO INPUT ALARM: The MAGIC THipPro Lite can
detect if a signal is present on the AES3/EBU
inputs. If not, an alarm is displayed in the PC
software. The alarm can be deactivated here.
Mode & Audio Line (3)
87