AVT MAGIC THipPro Lite, Руководство по настройке

Страница: 43 / 158

▪
BUSY / DROP TONE: The MAGIC THipPro Lite can
detect if the remote station has hung up. It is
monitoring the audio signal for a sequence of
tones and pauses with defined duration. The
sequence might be different for every PBX or
provider.
▪
TONE DURATION: Specify a custom tone duration.
▪
PAUSE DURATION: Specify a custom pause
duration.
▪
MEASURE VALUES: Click the button to measure the
actual sequence and set it as custom tone and
pause duration. To measure the values correctly
make sure the drop tone can be heard on the first
telephone line connected to the PBX or to the
public network, respectively.
▪
ENABLE EXPERT SETTINGS: Help to improve the
audio signal on telephone lines with difficult line
characteristics.
▪
HIGH PASS FILTER CUT-OFF > RECEIVE: Sounds
below this frequency are filtered out (e.g., low
frequency hum).
▪
POTS LINE LEVEL ADJUSTMENT
▪
RECEIVE: Increase the value to amplify the audio
signal coming in from the telephone line. Decrease the
value if the audio is distorted.
▪
TRANSMIT: Increase the value to send a louder signal.
Decrease the value if the audio signal sounds
distorted at the remote station.
▪
DEFAULT SETTINGS: Resets all values on the page
to factory settings.
POTS Interface: PBX / Outside Line (3)
45