Camera interfaces
Bigeye Technical Manual
V2.0.0
40
Binning
Each Bigeye camera variant supports one distinct binning configuration (either
1 x 2 or 2 x 2) which can be switched on or off.
This is controlled using the GigE Vision features
BinningVertical
and
BinningHorizontal
from the ImageSizeControl branch of the feature tree.
In the case of 2 x 2 binning the two features are coupled. This if one of
BinningVertical
or
BinningHorizontal
is changed, the counterpart is
automatically changed, too.
ImageSizeControl
Bigeye P-629
On
Image-on-demand mode.
Electromechanical shutter enabled.
Exposure control via ExposureTime and DarkTime features
(ExposureMode = Timed) or externally (ExposureMode = Off).
Off
Image-on-demand mode.
Electromechanical shutter always open.
Exposure control via ExposureTime and DarkTime features
(ExposureMode = Timed) or externally (ExposureMode = Off).
Bigeye P-1100
On
Image-on-deman mode.
Peltier cooling active.
Exposure control via ExposureTime and DarkTime features
(ExposureMode = Timed) or externally (ExposureMode = Off).
Off
Continuous mode with fixed exposure time and frame rate.
Peltier cooling inactive (power saving).
Feature
Description
BinningVertical
Number of
horizontal
photo-sensitive cells to combine together.
This increases the intensity (or signal-to-noise ratio) of the
pixels and reduces the
horizontal
resolution (
width
) of the
image.
BinningHorizontal
Number of
vertical
photo-sensitive cells to combine together.
This increases the intensity (or signal-to-noise ratio) of the
pixels and reduces the
vertical
resolution (
height
) of the image.
Table 14: Camera standard feature: ImageSizeControl
Camera
TriggerMode
Description
Table 13: TriggerMode
