Camera interfaces
Bigeye Technical Manual
V2.0.0
29
Camera interfaces
This chapter gives you information on the control junction, inputs and outputs
and trigger features.
Control junction
Camera I/O connector pin assignment (15-pin
D-Sub jack)
This jack is intended for the power supply as well as for controlling the camera
by the user.
www
For accessories like cables see:
http://www.alliedvisiontec.com/emea/products/
accessories/gige-accessories.html
Figure 11: Camera I/O connector pin assignment (Bigeye P-132B/Cool/Solar Cool)
Bigeye P-132B / P-132B Cool / P-132B Solar Cool
Pin Signal
Direction Level
Description
1
External Power
+12 V DC
Power supply
max. 2.8 A
2
3
External GND
4
5
---
Reserved
6
---
Reserved
7
RXD
In
RS232
Serial control
8
TXD
Out
RS232
Serial control
9
Mode input
+
12V, 20 mA max.
Internal pull-up resistor
10
Trigger input
-
12V, 20 mA max.
Optocoupler input
11
+
12
Exposure output
-
12V, 20 mA max.
Optocoupler output
13
+
14 Line-sync output Out
5 V (at no load)
Active low
15 Frame-sync
output
Out
5 V (at no load)
Active low