7. Web Manager
8. Web Viewer
6. Web Viewer
9. Web Manager
How to set WDR
If you want to watch the more clear image under back light condition,
you can do setting as below, and choose the step and click Save.
* You should check the pictures after click the Save button.
Case 3
Frame Rate 15[fps]
Bit Rate 2000[Kbps]
The pictures transferred per 1 sec. is decreased from 30 to 15.
The date size transferred per 1 sec. is decreased from 4000[Kbps] to 2000.
Picture quality is same, network load will be decreased from 4000[Kbps] to
2000, by half.
Therefore you should change both frame rate and bit rate.
Refer to below bit rate and frame rate example for your easier understanding.
Current Status
Frame Rate : 30[fps]
Bit Rate : 4000[Kbps]
Case 1
Frame Rate 15[fps]
Bit Rate 4000[Kbps]
The pictures transferred per 1 sec. is decreased from 30 to 15.
The date size transferred per 1 sec. is maintained on 4000[Kbps]
Picture quality will be better, and network load will be same.
Case 2
Frame Rate 30[fps]
Bit Rate 2000[Kbps]
The pictures transferred per 1 sec. is maintained on 30.
The date size transferred per 1 sec. is decreased from 4000[Kbps] to 2000.
Picture quality will be worse and network load will be decreased from
4000[Kbps] to 2000, by half.
Frame rate / Bit rate adjustment
If there is a rolling picture under lighting, you can use this Suppress rolling function.
If you choose “Strong” on Suppress Rolling function, electric shutter will be fixed at
1/15 ~ 1/120 sec. you should be careful when you use it under bright lighting.
Click Help ( ) for more details.
Suppress rolling
4) After Update completed, click Restart
3) Wait until Update completed
* Don’t click any buttons when it is being updated.
Update is needed to improve the functions and quality.
1) Click the find and choose the update file.
2) Click Update start and wait until Wait Downloading appears.
* Don’t click any buttons when you are waiting.
How to update the firmware
When it is working fine under LAN condition, but not working under WAN,
and the camera cannot receive the correct time from NTP server,
Check the network setting and change
You can control all the functions through Web Manager log on.
When you use, you should change ID and Password and don’t open for
secure use.
1) Enter ID / Password
2) Click Manager
1) Stream : Choosing stream, displaying the status of chosen stream
2) Viewer Size : Choose the size of window
3) Disconnect : Disconnect the camera
4) Save : Record the current moving picture in AVI file format.
5) Capture : Save the current still picture in BMP file format.
6) Path : Choose the directory to Save, Capture
7) Audio On : Turn On/Off Audio
Audio should be On at setting.
Web viewer functions
Install Active-X
You can connect the web server inside the camera and check the picture.
First enter the address on internet explorer.
1) Enter ID / Password
2) Click Viewer
ID
Password
admin
3)
4)
Image Mirror
WDR
Normal
Enable
WDR
Step 1
Step 2
Step 3
Step 4
Step 5
Save
Ligth Compensation
Back-light
Front-light
1280x1024
640x480
Input 1
Input 2
Stream
Source
Codec
show / hide
Save
Stream 1
Stream 2
Stream 3
Input
Frame Rate(fps)
Key Frame
Bit Rate(Kbps)
30
30
4000
(1~15)
(5~30)[15]
(64~12000)[8000]
Rate Mode
VBR
None
MJPEG
Frame rate(fps)
5
(1~15)
Quality
50
(5~80)[50]
None
MPEG4
Frame Rate(fps)
15
(1~15)
Key Frame
30
(5~30)[15]
Bit Rate(Kbps)
4000
(64~12000)[8000]
( ) : Value Range [ ] : Default Value
Rate Mode
VBR
H.264
Resolution
Stream Setting
1)
2)
3)
1)
5)
4)
2)
3)
1)
2)
ID
Password
admin
1)
2)
3)
4)
5)
1)
4)
6)
2)
Assigned IP
IP Address
DNS
3)
5)
192.168.1.30
MAC
Dynamic(DHCP)
Static
IP Address
Subnetmask
Gateway
1’st DNS
168.126.63.1
2’nd DNS
192.168.1.30
255.255.255.0
192.168.1.1
40:04:0C:01:00:AA
1)
2)
Shutter Speed
Auto
Suppress Rolling(60Hz)
User
weak
Shutter Speed 1/60
strong
(-)
(2)
(+)
AGC
2)
3)
4)
1)
