Page 1
AVS RXPRO 4-Channel Controller
Installation Manual
INTRODUCTION
The AVS RXPRO is a multi-purpose 4-channel narrow-band UHF receiver/transmitter set with fully programmable relay
outputs (1 amp relays).
All outputs are individually programmable to suit almost any application (momentary, latched,
timed or pulsed)
Up to 5 remote controls can be programmed and used
Compatible with wireless sensors (up to four can be programmed in)
Up to 200 metres radio frequency range (line of sight)
Programming via remote
Power supply requirement: 12VDC @ 500mA
SCHEMATIC DIAGRAM
4 CHANNEL RECEIVER
REMOTE BUTTON CONVERSION
NOTE:
By default all channels are 1-
second pulsed outputs (i.e. pressing the
button will turn the output on for 1
second and then turn off). See
Programming
for modifying to suit your
application.
Output Channels
TX2-01 433M
TX4-03 433M
TX4-04 433M
1
1
Bottom
2
2
Left
3
NA
Right
4
1+2
Left
AVS RXPRO
