AVS RXPRO, Руководство по установке

Страница: 5 / 10

Page 5
LATCHED OR PULSED OUTPUT
1. Enter programming mode (see page 3)
2.
Press button 3 repeatedly until the channel lights indicate one of
the output channels you wish to program.
3. Press button 2 until the feature lights are on as shown.
Press button 1 to swap the feature light(s) between flashing
and not flashing.
Flashing Not Flashing
4.
Latched Output. Pulsed Output. If Timed Output is
turned on then the output will pulse
for the programmed time. See
Timed
Output.
5. Press and hold button 2 on the remote control until the lights
start scrolling.
The output has now been programmed.
NORMALLY OPEN OR NORMALLY CLOSED OUTPUTS
1. Enter programming mode (see page 3)
2.
Press button 3 repeatedly until the channel lights indicate one of
the output channels you wish to program.
3. Press button 2 until the feature lights are on as shown.
Press button 1 to swap the feature light(s) between flashing
and not flashing.
Flashing Not Flashing
4.
Normally Open
Output.
Normally Closed Output
5. Press and hold button 2 on the remote control until the lights
start scrolling.
The output has now been programmed.
OR
OR