manualshive.com logo in svg

AVProEdge AC-MX-42X, Руководство пользователя

Поделиться
Скачать
AVProEdge AC-MX-42X Скачать руководство пользователя страница 22

22

WebUI: System - Hardware

LCD Timeout -

 This adjusts the time the front panel display will stay lit up when a button is pressed.  

There are four setting available

1.  Always on (Default)
2.  15 Seconds
3.  30 Seconds
4.  45 Seconds

WebUI: System - Firmware Update Cont.

Once the firmware file has been uploaded, it will display all containing firmware files.  Here you can select 

individual firmware files to load or simply leave all files/options selected.  If the version currently installed 

not newer, then that update will be skipped automatically.

Once the progress bar hits 100% click the CLOSE button, the firmware upgrade process is complete.

Now you will want to go back and re-apply settings like INPUT/OUTPUT Labels, applied EDIDs, Video Scaler 

Settings, Audio Settings, etc.

Keypad Lock -

 Enable or Disable (default) the front 

panel Keypad Lock. 

MCU/Version - 

Lists the current Firmware Versions

UPDATE FIRMWARE -

 Check/upload firmware.

FACTORY RESET -

 Restores matrix to Factory Defaults

REBOOT -

 Reboots the AC-MX-42X

Содержание AC-MX-42X













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды