AVProEdge AC-AEX-RC-HUB, Руководство пользователя

Страница: 26 / 31

Page 26 of 31
Console
The Web UI features a built-in command console that allows API commands to be sent directly to the unit.
Command List
Command Action
H Help
STA Show global system status
SET RST Reset to factory defaults
SET RBT System reset to reboot
SET LAN RBT Set LAN MCU reset to reboot
SET ADDR xx Set System Address to xx {xx=[00-99](00=single)}
SET BAUDR x Set System Baudrate to x {x=[0~5]
(0=9600, 1=14400, 2=19200, 3=38400, 4=57600, 5=115200)}
GET ADDR Get System Address
GET STA Get System Status
GET CONFIG Get System Configuration
GET BAUDR Get System Baudrate
Input Setup Commands
SET INx EN/DIS Set Audio Input Enable/Disable {x=[0-12](0=all)}
SET INx VOLy Set Audio Input Volume Adjustment {x=[0-12](0=all), y=-50~+50}
GET INx EN Get Audio Input Enable/Disable {x=[0~12](0=all)}
GET INx VOL Get Audio Input Volume Adjustment {x=[0~12](0=all)}
GET INx SIG STA Get Input x Signal Status {x=[0~12](0=all)}
Output Setup Commands
SET OUTx EN/DIS Set Audio Output Enable/Disable {x=[0~12](0=all)}
SET OUTx AS IN y Set Audio Output x to Input y {x=[0~12](0=all), y=[1~12]}
SET OUTx FOLLOW y OUTz Set Audio Output x follow settings {x=[0~12](0=all[excluding self])}
Follow Modes 0=None, 1=Source, 2=Volume, 3=Volume
If Follow Mode ! 0, then OUTz is the output that will be followed
SET OUTx MUTE/UNMUTE Set Audio Output Mute/Unmute {x=[1~12](0=all)}
SET OUTx VOL y Set Output x EQ-Audio Volume Level y {x=[0~12](0=all), y=[0~100]}
SET OUTx VOL + y Increase Output x Volume by y {x=[1~12], y=[1~100, optional default 1]}
SET OUTx VOL – y Decrease Output x Volume by y {x=[1~12], y=[1~100, optional default 1]}
SET OUTx BAL + y Increase Output x Balance by y {x=[1~12], y=[1~100, optional default 1]}
SET OUTx BAL - y Decrease Output x Balance by y {x=[1~12], y=[1~100, optional default 1]}
SET OUTx EQ y Set Output x Audio Volume EQ Mode y {x=[0~12](0=all), y=[0~7]
(0=Off, 1=Classical, 2=Headphone, 3=Hall, 4=Live, 5=Pop, 6=Rock, 7=Vocal)}
GET OUTx EN Get Audio Output Enable/Disable Status {x=[0~12](0=all)}
GET OUTx AS Get Output x Audio Route {x=[0~12](0=all)}
GET OUTx FOLLOW Get Audio Output x follow settings {x=[0~12](0=all[excluding self])}
Follow Modes 0=None, 1=Source, 2=Volume, 3=Volume
If Follow Mode ! 0, then OUTz is the output that will be followed