Page
19
of
31
Output Following
This setting allows an output to mirror
, or “follow”,
the same operation as another output. It can
also be used to create groups of outputs that will continually share the same input source, output
volume level, or both. Changes to a followed output will automatically update any outputs when
this setting is enabled.
Source Only
Matrix to the same input as the selected followed output.
Volume Only
Set volume equivalent to the selected following output, including if the followed
output is muted.
Source and
Volume
Matrix to the same input and set volume equivalent to the selected followed
output.
Once selected, an additional drop-down menu is provided to match the output it will follow.
NOTE:
Once an output is set to follow another output, you will lose the ability to adjust either the input
source or volume for that output until
Output Following
is disabled.
