Back to top
4
•
Installation and servicing should only be done by Qualified Service Personnel and conform to all
local codes.
•
This unit is designed for indoor use only and it must not be installed where exposed to water or
other liquids and moisture.
•
Before powering on the device, check the input power voltage carefully.
•
Avoid shock and vibration when transporting and installing the device.
•
Electronic devices produce heat. Do not block the ventilation slots of the device and make sure
the installation environment is well ventilated to avoid overheating.
•
Before cleaning, unplug the power cable. Use a soft, damp cloth to clean the device, do not use
strong or abrasive detergent to clean that will damage the device.
•
If you wish to dispose this product, please contact Avonic to obtain info about the disposal
procedure.
For any questions or suggestions, contact your reseller or the local distributor of Avonic. Find the local
distributor on the website of Avonic. For the most recent version of the manual or datasheet, look at the
Avonic website: www.avonic.eu
Thank you for your Avonic purchase. Before beginning to operate this device, please read the manual in
order to make sure the best performance is obtained. Save this manual for future reference.
Join Avonic
Safety Notes
Contact
INTRODUCTION
