Avocent LongView LongView Wireless, Инструкция по установке и эксплуатации

Страница: 16 / 32

6
LongView Wireless Installer/User Guide
Installing a LongView Wireless Extender
Follow the procedures To install a LongView Wireless transmitter and To install a LongView
Wireless receiver to properly install your new KVM extension system.
WARNING: To reduce the risk of electric shock or damage to your equipment -
Disconnect the power from the device by unplugging the power supply from the electrical outlet.
To install a LongView Wireless transmitter:
1. Ensure that the video setting of your server is 1024 x 768, 800 x 600, or 640 x 480 at 60Hz
refresh rate. Best performance will be achieved if the color resolution is set to 24 bit color
or higher.
2. Power down the server that will be connected to your LongView Wireless extender.
3. Unplug the peripherals (keyboard, mouse, monitor and speakers with built-in amplifiers, if
applicable) from your server.
Figure 2.1: LongView Wireless Transmitter Installation Example
Power
Supply
Transmitter
Cables
Peripheral Cables
Audio Cable
383C-LongviewWireless.book Page 6 Wednesday, April 13, 2005 9:30 AM