Avocent CPS1610, Инструкция по установке и эксплуатации

Страница: 30 / 82

30
CPS 810/1610 Installer/User Guide
The BREAK access right grants users the ability to send a serial break
sequence to the attached serial device. On certain servers, the serial break
sequence has a special meaning. The BREAK access right allows the CPS
administrator to grant this capability only to those users that need access to
the PORT BREAK command.
The last access right grants users access to specific serial ports on the CPS.
When you grant a user access to one or more serial ports, you are granting the
right to access that serial port and connect to the attached serial device. Port
access rights can be granted to all serial ports. You may also grant port access
to individual serial ports or a range of serial ports.
The Admin user has been pre-configured in the User Database to have all
access rights.
When configured for use with the DSView software, there are two levels of
access rights: user access and administrator access. DSView users that have
administrator access are granted all CPS access rights: SCON, SMON, USER,
BREAK and access to all attached serial devices. DSView users that have user
access can only access the serial device to which they are connected.
The following commands can be used to configure and operate the CPS.
PORT
Use this command to make changes to the CPS serial port settings in the CPS
Configuration Database. This command is also used to access port history data
received from the attached device and to genereate a serial break on a port.
SERVER
Use this command to make changes to the CPS and network settings in the CPS
Configuration Database. This command is also used to update the CPS program
image in FLASH memory, to reboot the CPS and establish the security mode.
SHOW
Use this command to display information about the CPS, including a list of
connected users, CPS server statistics and serial port status.
USER
Use this command to change the CPS User Database or terminate a user’s
session with the CPS.